Glossary entry (derived from question below)
English term or phrase:
Neat Quenching oil
Indonesian translation:
minyak pendingin murni
Added to glossary by
Abdul Karim
Mar 14, 2007 09:57
17 yrs ago
2 viewers *
English term
Neat Quenching oil
English to Indonesian
Tech/Engineering
Chemistry; Chem Sci/Eng
-
Neat Quenching oil
:: maaf, tanpa konteks.
:: maaf, tanpa konteks.
Proposed translations
(Indonesian)
5 | minyak pendingin murni | Hipyan Nopri |
4 | minyak murni celup-dingin | M. Laut |
4 | minyak peredam panas murni | ErichEko ⟹⭐ |
3 | minyak pemadam murni | Ian Forbes |
3 | oli pendinginan cepat apik | Hikmat Gumilar |
Proposed translations
1 hr
Selected
minyak pendingin murni
Dalam konteks ini,
neat = murni
quenching = pendingin
oil = minyak
Ref.:
Neat Oil—as it comes from the drum; not diluted. Usually refers to soluble oil before mixing with water to form soluble oil and water MRF mixtures. Sometimes used to describe straight mineral oil.
http://www.aware-services.com/orc/glossary.htm
Negative Quenching (Negative Hardening): Accelerated cooling in water or oil, from a temperature below the critical range . . .
www.sfsa.org/sfsa/glossary/deftrmnn.html
--------------------------------------------------
Note added at 1 hr (2007-03-14 11:57:18 GMT)
--------------------------------------------------
Saya sependapat dengan Ian, ini biasanya berkaitan dengan pendinginan logam panas.
neat = murni
quenching = pendingin
oil = minyak
Ref.:
Neat Oil—as it comes from the drum; not diluted. Usually refers to soluble oil before mixing with water to form soluble oil and water MRF mixtures. Sometimes used to describe straight mineral oil.
http://www.aware-services.com/orc/glossary.htm
Negative Quenching (Negative Hardening): Accelerated cooling in water or oil, from a temperature below the critical range . . .
www.sfsa.org/sfsa/glossary/deftrmnn.html
--------------------------------------------------
Note added at 1 hr (2007-03-14 11:57:18 GMT)
--------------------------------------------------
Saya sependapat dengan Ian, ini biasanya berkaitan dengan pendinginan logam panas.
4 KudoZ points awarded for this answer.
Comment: "terima kasih Pak Hipyan dan rekan lainnya"
1 hr
minyak pemadam murni
"Quenching oil" adalah minyak yang dipakai dalam proses mendinginkan logam secara cepat dengan cara pencelupan logam panas kedalam minyak tersebut. "Quenching oil" menurunkan suhu logam panas secara lebih pelan daripada pencelupan kedalam air sehingga tidak mudah timbul retak dalam logam tersebut.
Adapun "neat" berarti tidak dicampur dengan bahan lain.
Sepertinya belum ada istilah baku untuk "quenching" sehingga bahasa Indonesia masih menggunakan kata seperti "mengquench", "diquench" dsb akan tetapi "minyak pengquench" kedengaran agak aneh sementara "minyak pendingin" lebih tepat untuk minyak yang dipakai dalam proses memotong logam dingin, misalnya dengan blowtorch.
Adapun "neat" berarti tidak dicampur dengan bahan lain.
Sepertinya belum ada istilah baku untuk "quenching" sehingga bahasa Indonesia masih menggunakan kata seperti "mengquench", "diquench" dsb akan tetapi "minyak pengquench" kedengaran agak aneh sementara "minyak pendingin" lebih tepat untuk minyak yang dipakai dalam proses memotong logam dingin, misalnya dengan blowtorch.
Reference:
http://www.noria.com/dictionary/default.asp?definitionsearch=xqxqxqxq222&alphasearch=Q
http://www.airproducts.co.id/ind/metals/foundries_heatTreatment.htm
1 hr
minyak murni celup-dingin
celup-dingin = mendinginkan mendadak
4 hrs
oli pendinginan cepat apik
Rapid cooling, as by immersion in oil or water, of a metal object from the high temperature at which it is shaped.
Quenching is usually done to maintain mechanical properties that would be lost with slow cooling. It is commonly applied to steel objects, to which it gives hardness. The quenching media and the type of agitation during quenching are selected to obtain specified physical properties with minimum internal stresses and distortions. Oil is the mildest medium, and salt brine has the strongest quenching effect. In special cases, steel is cooled and held for some time in a molten salt bath, which is kept at a temperature either just above or just below the temperature where martensite begins to form. These two heat treatments, called martempering and austempering, both result in even less distortion of the metal. Copper objects hardened by hammering or other deformation at ordinary temperatures can be restored to malleability by heating and quenching. See also tempering.
--------------------------------------------------
Note added at 4 jam (2007-03-14 14:12:34 GMT)
--------------------------------------------------
atau pelumas pendinginan cepat apik...
Quenching is usually done to maintain mechanical properties that would be lost with slow cooling. It is commonly applied to steel objects, to which it gives hardness. The quenching media and the type of agitation during quenching are selected to obtain specified physical properties with minimum internal stresses and distortions. Oil is the mildest medium, and salt brine has the strongest quenching effect. In special cases, steel is cooled and held for some time in a molten salt bath, which is kept at a temperature either just above or just below the temperature where martensite begins to form. These two heat treatments, called martempering and austempering, both result in even less distortion of the metal. Copper objects hardened by hammering or other deformation at ordinary temperatures can be restored to malleability by heating and quenching. See also tempering.
--------------------------------------------------
Note added at 4 jam (2007-03-14 14:12:34 GMT)
--------------------------------------------------
atau pelumas pendinginan cepat apik...
5 hrs
minyak peredam panas murni
Dengan definisi menumpang saja pada yang sudah ada.... :0
Peredam mengesankan kepastian bahwa panas pasti binasa (= menjadi dingin). HTH.
Peredam mengesankan kepastian bahwa panas pasti binasa (= menjadi dingin). HTH.
Something went wrong...